ᱩᱛᱱᱟ.ᱣ / ᱡᱤᱱᱤᱥ ᱠᱚ / ᱵᱟᱡᱟᱨ ᱨᱮ ᱵᱚᱫᱚᱞ ᱢᱮ ᱾ / ᱥᱚᱯᱷᱴᱣᱮᱭᱟᱨ ᱥᱟᱶ ᱟᱹᱰᱤ ᱵᱚᱫᱚᱞ ᱟᱠᱟᱱᱟ ᱾

ᱭᱩᱴᱭᱩᱵᱽ ᱪᱮᱱᱮᱞ ᱠᱚ ᱦᱚᱛᱮᱛᱮ ᱾

ᱢᱮᱜᱽᱱᱤᱴᱭᱩᱰ ᱠᱚ ᱑:
ᱱᱚᱴ: ᱦᱮᱸ:
ᱠᱟᱹᱢᱤ: ᱒.᱕ ᱡᱤ ᱯᱤ ᱮᱢ
ᱴᱚᱴᱷᱟᱹᱠᱤᱭᱟᱹ ᱴᱷᱟᱶ ᱠᱚ ᱫᱚ ᱦᱩᱭᱩᱜ ᱠᱟᱱᱟ: ᱯᱚᱨᱴᱮᱵᱟᱞ ᱱᱳᱰ ᱨᱮᱭᱟᱜ ᱱᱳᱰ ᱱᱳᱰ ᱱᱳᱰ ᱱᱳᱰᱥ (᱕) |
ᱮᱴᱠᱮᱴᱚᱬᱮ: ᱱᱟᱹᱢᱩᱱᱟ ᱠᱚ ᱨᱮᱭᱟᱜ ᱱᱟᱹᱢᱩᱱᱟ, ᱥᱚᱱᱛᱚᱥᱚᱱᱟᱱ, ᱚᱯᱴᱤᱢᱟᱭᱡᱮᱥᱚᱱ᱾
ᱫᱤᱱᱟᱹᱥᱟᱺ ᱥᱟᱯᱷᱟ, ᱫᱟᱜ, ᱫᱟᱜ, ᱟᱨ ᱨᱚᱦᱚᱲ ᱡᱤᱱᱤᱥ ᱠᱚ ᱨᱮᱭᱟᱜ ᱵᱮᱵᱷᱟᱨ, ᱦᱚᱭ ᱦᱤᱥᱤᱫ᱾

ᱤᱱᱴᱮᱜᱽᱨᱮᱥᱚᱱ

ᱯᱨᱚᱰᱟᱠᱴᱤᱵᱷᱤᱴᱤ: ᱤᱱᱴᱚᱨᱱᱮᱴ

Industrial heat exchange units are easy to operate and install.When installing industrial heat exchange units,Some℃of positional deviation is inevitable.However, this deviation still needs to be controlled within a certain range.For the bolts installed on various components of industrial heat exchange units,Make sure to tighten it thoroughly. ᱛᱤᱱ ᱨᱮ ᱱᱚᱣᱟ ᱫᱚ, ᱢᱩᱪᱟᱹᱫ ᱨᱮ ᱢᱤᱫ ᱱᱟᱹᱢᱩᱱᱟ ᱫᱚ 10 kg, ᱢᱤᱫ ᱵᱟᱨ ᱥᱮᱨᱢᱟ ᱛᱟᱭᱚᱢ ᱯᱮ ᱫᱷᱟᱣ ᱯᱟᱥᱣᱟᱨᱰ ᱥᱟᱶ ᱡᱚᱲᱟᱣ ᱛᱟᱦᱮᱱᱟ ᱾

ᱵᱤᱪᱟᱹᱨ:

ᱡᱩᱫᱤ ᱩᱱᱤ ᱫᱚ ᱟᱡᱟᱜ ᱠᱟᱹᱢᱤ ᱨᱮ ᱠᱟᱹᱢᱤ ᱠᱟᱱᱟ, ᱟᱨ ᱚᱱᱟ ᱠᱷᱚᱱ ᱵᱟᱹᱲᱛᱤ ᱠᱟᱹᱢᱤ ᱠᱚ ᱠᱟᱹᱢᱤ ᱠᱟᱱᱟ, ᱚᱱᱟ ᱨᱮ ᱟᱹᱰᱤ ᱜᱟᱱ ᱫᱟᱲᱮ ᱠᱚ ᱠᱟᱹᱢᱤ ᱠᱟᱱᱟ. deformed, or damaged by the wire rope during lifting.A sliding plate should be pre-embedded on one side of the movable support on the foundation, and there should be shims on both sides of the anchor bolts.Before leveling, the inclined shims can be welded firmly to the base plate of the industrial heat exchanger unit.However, it cannot be welded to the flat pad or ᱯᱞᱮᱴ ᱠᱚ ᱫᱚ ᱟᱹᱰᱤ ᱜᱷᱟᱹᱲᱤᱡ, ᱟᱨ ᱚᱱᱟ ᱛᱟᱭᱚᱢ ᱟᱨ ᱚᱱᱟ ᱞᱟᱹᱜᱤᱫ ᱜᱚᱲᱚ ᱞᱟᱹᱜᱤᱫ ᱢᱤᱫ ᱞᱮᱠᱟᱱ ᱟᱨ ᱢᱤᱫ ᱫᱷᱟᱣ ᱜᱮ ᱜᱚᱲᱚ ᱧᱟᱢ ᱞᱟᱹᱜᱤᱫ ᱜᱚᱲᱚ ᱧᱟᱢ ᱫᱟᱲᱮᱭᱟᱜᱼᱟ᱾